CB10-HV Counterbalance Valve
English Chinese (Simplified)

comatrol hydraulic cartridge valves





CB10-HV : Counterbalance valve, 10-size, hydraulic vent. This valve is 3-ported, externally piloted and low leakage. The check section allows free flow from the directional valve (port 2) to the load (port 1), while normally blocking flow from port 1 to port 2. Reverse flow is blocked until pilot pressure is applied at port 3. When the load pressure at port 1 rises above the pressure setting, the intergral relief valve is activated and pressure is relieved from port 1 to port 2.





Single counterbalance valves are normally used when the load is unidirectional, such as aerial lifts, cranes, or winches. In load holding applications, they can be used as hose-break valves when installed near or within an actuator. Dual valves can be used for controlling loads bi-directionally in motor applications, or for cylinders going over center.








Rated Pressure   350 bar [5075 psi]
Rated flow at 22 bar
[319 psi]   
  60 l/min
[16 US gal/min]
Leakage   10 drops/min @
70% crack pressure  
Weight   0.22 kg [0.47 lb]
Pilot Ratio   3:1, 4.5:1, 10:1
Cavity   SDC10-3S


Performance Curve









Example Circuits




Ordering Information

CB10-HV ordering 2015  


Product Documents and Downloads
Download this file (CB10-HV - 3D STP Files.zip)CB10-HV - 3D STP Files.zip44 kB04-28-2015
Download this file (CB10-HV Catalog Page.pdf)CB10-HV Catalog Page.pdf297 kB04-28-2015

© Comatrol 2018 | All rights reserved

  Facebook      Twitter     linkedin Linked-In     youtube YouTube  Privacy Policy    Term of Use


Danfoss Power Solutions S.r.l. IT07874070019