OPERATION & APPLICATION
The Loop Flushing Block allows oil to drain from the power transmission loop to other oil treatment components. The low pressure side of the circuit is directed to the relief valve, which is then drained out of the transmission loop.
This HIC is typically used in closed loop circuits to assist in the process of removing contamination and cooling oil. Hydrostatic systems with sustained operation and continuous pressure will benefit from a loop flushing circuit.
To configure the LFB12, determine the charge pump pressure and desired flushing flow. Working up from the desired flow, select the orifice size with a pressure rise that, when added to one of the available relief settings (in the ordering information section), meets the charge pump pressure. |
Schematic |
PERFORMANCE CHART
Pressure rise per orifice option
33 cSt [154 SUS] hyd.oil at 38°C [100°F]
DIMENSIONS
mm [in]
ORDERING INFORMATION